| Power : | 100-240VAC 50/60Hz |
|---|---|
| Power Consumption: | 30va |
| Compressed Air Input Flow: | 500L/Min (17.0cfm) |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
E-1136 Main Features:
-Pump the air from the tyre by the internal vacuum generator before nitrogen inflation *
-Auto-Start Inflation *
-Single Tyre Application
-Suit for: Car
E-1136 Technical Data Summary
| Dimensions (Height*Width*Depth) | 1255mm*700mm*435mm 49.4"*27.6"*17.1" |
| Net Weight | 87kg/191.8lbs |
| Gross Weight | 104kg/229.3lbs |
| Packing Size (Height*Width*Depth) |
1380mm*730mm*510mm 54.3"*28.7*20.1" |
| Power Requirement | 100-240Vac 50/60HZ |
| Power Consumption | 30VA |
| Operating Temperature Range | 0ºC/32°F to 50ºC/122°F |
| Compressed Air Input Range | 87-123PSI/6-8.5bar /600-850kPa |
| Compressed Air Input Flow | 500L/min (17.0cfm) |
| Nitrogen Purity | 95-99+% |
| Nitrogen Output | 58L/min (2.0cfm) @116PSI/8bar/800kPa Absorption pressure |
| Maximum Nitrogen Pressure in Tank | 102PSI/7bar/700kPa |
| Operating Range | 15-72PSI/1-5bar/0.1-0.5Mpa/1-5kgf/cm2 |
| Resolution | 1PSI/0.1bar/0.01Mpa/0.1kgf/cm2 |
| Units of Measurement | PSI/bar/Mpa/kgf/cm2 |
E-1136 Specifications:
1. Generates nitrogen from your compressed air
2. 2 Pre-Filters
3. 50L/13.2gal (us) internal nitrogen storage tank
4. Auto-start inflation
5. Remain at last setting
6. Audible and visual end of the cycle signal indicators
7. LED display
8. 1 Nos.*10m/32.8ft standard hose with single clip-on open tyre chuck
9. Nitrogen purity test port
10. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun
11. To increase the tyre nitrogen purity, the valve core must be removed
manually and allow all the air to escape from the tyre. Before inflate
tyre with nitrogen, firstly the unit will pump the residualair from the tyre
by the internal vacuum generator then inflate nitrogen to the target tyre
pressure
E-1136 Operation Steps:
1. Remove the tyre valve core to exhaust the residual air from the tyre, then re-fit the tyre valve core.
2. Set final target pressure using the + and - buttons. The upper LED screen will show the target pressure.
3. Connect air hose to tyre valve stem.
4. Press "START" key.
5. When unit "beeps" and the upper LED screen flashes "END", tyre inflation is complete.
){kind=link}